How to stop Valkyrie V360 LOKI temp spikes in Destiny 2?
Those random 0.5-second freezes during combat were driving me insane. Checking the logs, I saw the CPU temp jumping violently between 62℃ and 85℃. It turns out that after about 200 hours of use, the Valkyrie V360 LOKI had developed tiny air bubbles trapped in the pump head, causing gaps in the coolant flow. My first instinct was to lock the pump speed at 100% via software, but that was a mistake—the pump started making this high-pitched resonance noise that was absolutely grating, and the temp spikes didn't even go away. I had to go the physical route: while the PC was running, I tilted the chassis 45 degrees to force those bubbles up into the radiator. I also set the pump speed to a dynamic range of 80-90%. During an AIDA64 stress test, the cores finally leveled out at 65-71℃ with zero spikes. I actually struggled with this at first because my tilt angle wasn't steep enough, and the bubbles just danced around the pump head for a while before finally clearing on the third try. Coolant stayed around 34-38℃ with fans at 1200 RPM. The temp curves are finally flat.
