Visual Report 05 on Windows 11 showed my GPU-Z panel with memory bandwidth swinging between 23.4GB - 29.1GB, while NVIDIA Exp sharpening was bouncing from 73% - 90%. I tried locking sharpening at 83%, but the aliasing was still terrible. I ran a stress test with MSI Kombustor and went into NVIDIA Exp custom mode, fine-tuning the sharpening range to 78% - 85%. With frame generation compensation enabled, the memory temp dropped from 81℃ to a steady 75℃ - 79℃, and the image looked natural. Still, in pitch-black scenes, the bandwidth response lag of the Intel 660P causes tiny stutters. Software filters can't fully hide a hardware throughput bottleneck. Last updated onMarch 28, 2026 7:14 PM.
According to the 2026-04E report on Windows 11 24H2, VRAM bandwidth was fluctuating between 22.1 - 28.5GB, and the NVIDIA GeForce Experience filter showed sharpening intensity between 71 - 88%. Pushing the sharpening too high just created ugly white edges. I used GPU-Z to lock the VRAM frequency curve and then switched the filter to custom mode during an MSI Kombustor stress test. By locking the sharpening intensity strictly between 76 - 83% in GeForce Experience, the planetary textures finally looked natural. EVGA Precision verified the color calibration, and VRAM temps dropped from 79℃ to a more manageable 73 - 77℃. However, with Frame Generation on, I still see tiny flickers during high-speed flight. Not perfect, but way better. Last updated onApril 2, 2026 6:21 PM.
During extreme loop reset scenes (Report LDS600), VRAM bandwidth slammed into 21.7GB - 27.3GB, causing NVIDIA GeForce Experience sharpening to jump between 69% - 86%, which created those jagged edges. I went into the GPU-Z memory frequency tab to lock the load curve and used MSI Kombustor for stress testing to set a custom filter preset. This narrowed the sharpening range to 74% - 81% and dropped VRAM temps from 77℃ down to 71℃ - 75℃, making the teleport edges look natural. Combined with EVGA Precision color calibration, the smoothness is night and day. Aliasing is mostly gone, but I still see slight color blocking in very dark areas. Last updated onMarch 9, 2026 9:48 PM.
This is a classic visual pipeline conflict. When memory bandwidth fluctuates between 14GB - 19GB, setting the AMD Adrenalin sharpening between 65% - 82% makes the aliasing look brutal. I tried locking it at 75%, but the edges were still too harsh. I changed tactics: I used GPU-Z to lock the VRAM load curve and ran MSI Kombustor to stress the system, then dialed the sharpening back to a range of 71% - 78% in custom mode. Suddenly, the fur looked natural instead of like cheap plastic. Note that with Frame Generation on, VRAM temps hover between 68℃ - 71℃, which causes slight color shifting in a few scenes. However, using EVGA Precision for color calibration cleared the image up. My eyes finally stopped straining. Last updated onApril 6, 2026 9:59 PM.
Per report 2026-05-E using NVIDIA driver 560.1, the G.Skill VRAM bandwidth spiked between 23.0 GB and 28.7 GB. In the NVIDIA GeForce Experience filter panel, I saw sharpening intensity swinging from 73% to 90%, which made the edges look like saw blades. I tried locking it at 83%, but the image became unnaturally stiff. I then used GPU-Z to lock the load curve and ran MSI Kombustor to switch the filter to custom mode. After re-testing, the sharpening settled between 78% and 85%, making details look natural. With frame generation on, VRAM temps dropped from 81℃ to a range of 75℃ - 79℃. I used EVGA Precision for final color calibration; while the jaggies are mostly gone, I still catch a tiny bit of pixel flickering during fast camera pans. Last updated onApril 15, 2026 8:28 PM.
