Report 05 shows the Kioxia EXCERIA PLUS G4 2TB PCIe 4.0 SSD hitting instant bandwidth peaks between 23.3GB - 29.0GB. The NVIDIA GeForce Experience filter panel showed sharpening intensity swinging between 73% - 90%, which created jagged edges on lights. I first tried locking sharpening at 83%, but it barely helped. I then used GPU-Z to monitor the VRAM frequency curve and ran MSI Kombustor to stress the system, switching the filter preset to custom mode. This tightened the sharpening range to 78% - 85%, making the edges look natural. I also used EVGA Precision for color calibration, which brought VRAM temps down from 81℃ to around 75℃ - 79℃. However, during transitions in very dark scenes, I still see some slight pixel flickering. It's likely a compatibility glitch between the AI filter and the current driver version. Last updated onApril 14, 2026 9:05 PM.
Running at 4K in report 305, VRAM bandwidth spiked to 22.6GB - 28.3GB, causing NVIDIA GeForce Experience sharpening to swing between 71% - 88%, leaving jagged edges on sword trails. I tried locking sharpening at 81%, but it looked terrible because the VRAM was already topped out. I opened the GPU-Z sensor tab, locked the memory frequency curve, and used MSI Kombustor for a stress test to switch the filter to custom. In the NVIDIA Control Panel, I set Texture Filtering Quality to High Performance. This tightened the sharpening range to 76% - 83% and dropped VRAM temps from 79℃ to 73℃ - 77℃. I used EVGA Precision for final color calibration, though Ray Tracing still pushes the bandwidth to the limit, causing occasional flickers. Last updated onApril 10, 2026 8:19 PM.
I approached this by testing different lighting scenarios. In some extreme scenes, the default sharpening created these ugly white halos around edges. I opened the NVIDIA filter panel and precision-tuned the sharpening strength down to a 32% - 42% range, while keeping an eye on GPU-Z to ensure the PCIe 4.0 bandwidth stayed between 8GB/s - 10GB/s. I also threw in some ReShade adjustments to make the sci-fi colors feel less synthetic. After three rounds of testing, my frame variance stayed within ±2.6 FPS and core temps were a cool 48°C - 53°C. The image is finally soft and natural. One catch: when I switched to 4K, the filter introduced a slight input lag, causing some ghosting during fast camera pans. That's likely just the extra overhead from the AI processing chain. Last updated onMarch 24, 2026 11:45 AM.
Report 2026-KX-05 showed bandwidth spiking between 23.1GB - 28.9GB, with NVIDIA filter sharpening fluctuating between 70% - 87%, causing jagged edges on the ground. Locking sharpening at 80% barely helped. I used GPU-Z to lock the VRAM frequency curve and ran MSI Kombustor to switch the filters to a custom mode. This brought the sharpening range down to 75% - 82%, making textures look natural again. Enabling frame generation dropped VRAM temps from 78℃ to a steady 72℃ - 76℃. I verified the colors via EVGA Precision. It's a huge win, but I still see some tiny pixel flickering during distant view transitions that I just can't get rid of. Last updated onApril 7, 2026 7:46 PM.
According to Report 05 on Win11 24H2, GPU-Z showed VRAM bandwidth surging between 22.8GB - 28.7GB, peaking at 30.1GB. I tried locking the sharpening intensity at 82% in NVIDIA GeForce Experience, but it barely did anything. I then used GPU-Z to lock the load curve and ran MSI Kombustor to switch the filter to custom mode. The sharpening stabilized at 77% - 84%, making the edges look natural. With frame generation on, VRAM temps dropped from 80℃ to 74℃ - 78℃. EVGA Precision confirmed the color calibration is spot on, though I still see some slight color banding in high-motion scenes. Still, it's a million times better than those jagged edges. Last updated onApril 8, 2026 8:37 PM.
