Question 1

I'm seeing temp jumps and frame drops during scene switches in Ratchet and Clank: Rift Apart. Should I tweak virtual memory?

Accepted Answer

Every time I jumped into a new dimension, there was this annoying 0.2-second micro-stutter that is absolutely lethal in a fast-paced game. The fan response curve on the Valkyrie V360 MIST was way too sluggish, letting the CPU temp rocket from 60℃ to 88℃ in a heartbeat, which triggered a brief clock speed dip. I tried setting the fans to 100% in the BIOS, but my case sounded like a takeoffing helicopter and the stutters didn't even go away—total waste of time. I eventually went into the advanced settings and slashed the fan step response time from 2.0 seconds down to 0.5 seconds, while nudging the Vcore voltage to 1.28V. RTSS showed the frame times tighten from a chaotic 15-40ms range to a clean 9-13ms. The fans started 'hunting' (speeding up and slowing down rapidly) after the change, so I had to add a 5℃ hysteresis to stop the noise. CPU temps now hover between 68-75℃, and the input lag is gone. My fingertips finally feel in sync with the action.

Question 2

Should I adjust memory timings on the Biostar B650MT to fix frame drops in Banishers: Ghosts of New Eden?

Accepted Answer

Every time I unleashed a wide-area banishing skill, the screen would freeze for about 0.4 seconds. This random hitching was so bad I could barely focus. The default XMP profile on my Biostar B650MT was unstable at 6000MHz, with the memory controller hitting high latencies of 82-105ns during heavy asset loads. I tried increasing the virtual memory to 32GB in Windows, but that just made the whole system feel sluggish—a total nightmare. I headed back to the BIOS, navigated to Advanced Memory Settings, and loosened the primary timings from 36-36-36-76 to 38-40-40-80, while bumping the DRAM voltage from 1.35V to 1.40V. After 4 full passes of MemTest86, the error count dropped from 15 to 0. I actually hit three Blue Screens of Death when I first tried tightening the timings, only stabilizing after I loosened the tRFC parameter. RAM temps are now 48-54℃ and VRMs are at 55-60℃. System is finally stable.

Question 3

Why does Kingdom Come: Deliverance have texture loss and popping when moving fast on an Intel 660P 2TB? Page file fix?

Accepted Answer

Every time I galloped into a new area, the walls and ground would turn into blurry blobs of color. That kind of visual breakage is honestly anxiety-inducing. The Intel 660P 2TB was hovering around 68-75MB/s for random reads, but I was hitting random 200ms latency spikes when loading 4K texture packs. I tried dropping textures to 'Medium', but the game lost all its soul, and I felt defeated by my own hardware. I finally updated the firmware via the official tool and disabled 'Link State Power Management' in the Windows Power Options. In CrystalDiskMark, the read curve flattened out, and the textures started popping in instantly. Weirdly, the firmware update added 2 seconds to my boot time, which I only fixed after disabling 'Fast Boot' in the BIOS. Temps are now steady at 45-52℃. The resource loading is no longer dropping packets, and the input response feels way more connected to my fingertips.

Question 4

My Gainward RTX 5070 Ti has render pipeline blocks causing random freezes in Delta Force; do I need a driver change?

Accepted Answer

Every time I opened fire in an open field, the screen would just freeze for about 0.3 seconds. That kind of random stuttering had me on the verge of smashing my keyboard. The latest drivers for my Gainward RTX 5070 Ti Snow Step OC 2.0 were struggling with complex lighting, causing frame times to spike from 8ms to a massive 110ms. I tried updating Windows patches first, but that was a total waste of time—it didn't fix the lag and actually slowed my boot time by 8 seconds. It was a complete nightmare. I eventually used DDU to wipe everything clean and rolled back to a stable version from two iterations ago, while disabling the built-in driver overlay. RTSS showed frame times returning to a healthy 7-12ms, and the combat felt fluid again. I did lose about 3 FPS at 4K after the rollback, but that's a tiny price to pay for a game that doesn't hitch. GPU core temps stayed between 64-69℃. I finalized the stability settings in the driver control panel.

Question 5

I'm getting weird scheduling delays and frame drops while swinging through Manhattan. Help!

Accepted Answer

Every time I dive between skyscrapers, there's this tiny 0.1s hitch that completely breaks the immersion. With 96GB of Corsair Vengeance DDR5 6000MHz, the memory controller was hitting scheduling delay peaks of 12-18ms while indexing the city models. I tried lowering the texture quality, but that just made the game look like mud and didn't even stop the stuttering—it was honestly a frustrating waste of time. I eventually went into the power settings and switched the processor scheduling to High Performance, then enabled the XMP/DOCP high-speed profile in the BIOS. Monitoring with RivaTuner, my 1% lows jumped from 42 FPS to 65 FPS. The only downside was the idle temps climbing from 40℃ to 52℃, which I had to fix by aggressive fan curves. VRAM usage is stable at 11-14GB, and the input lag is finally gone; it feels incredibly snappy now.

Question 6

My game freezes for half a second during late-game turns in Civ 7. Is this a Jonsbo CR-1400 issue?

Accepted Answer

Every time the game hits the late-game stage with massive city simulations, the screen just freezes for about 0.5 seconds. It was driving me crazy. The Jonsbo CR-1400 ARGB Black Edition has a default curve that only hits 1200 RPM before 75℃, which is a joke for the bursty power draws of a 14th Gen CPU. I tried the 'Ultimate Performance' power plan, but that just spiked the power draw and sent my temps screaming toward the 98℃ redline—absolute nightmare. I ended up going into the BIOS, switching to Manual mode, and forcing the 70℃ threshold to hit 2000-2200 RPM. Now, the monitoring panel shows cores staying between 76-81℃ under load, and frame times dropped from a wild 18-40ms to a stable 11-16ms. I had some resonance noise at first because the start-up voltage was too low, but a tweak to 1.1V fixed it. CPU package power is now stable at 65-75 Watts. The input lag is gone and the game finally feels snappy. Still, this cooler is definitely pushed to its limit here.

Question 7

My Cities Skylines II keeps crashing when running high-res MODs on 16GB Kingston RAM, is virtual memory the issue?

Accepted Answer

Once my city population hit 100k, RAM usage spiked to 15.8GB and the game just vanished to the desktop without a word—totally anxiety-inducing. The default 19-19-19 timings on the Kingston DDR4 2666 caused massive latency of 95-110ns when indexing MODs, which basically forced the system to kill the process. I tried closing every single browser tab, but that only freed up 1.2GB, which was a complete waste of time. I ended up manually locking the Windows page file between 32GB and 64GB and pushed the RAM frequency to 2933MHz in the BIOS. MemTest86 showed zero errors, and I finally managed to run the city for 5 hours straight without a crash. I did notice some weird stutters when launching older software after the overclock, but bumping the voltage from 1.2V to 1.35V fixed it. RAM temps are sitting at 42-48℃. Resource Monitor shows the paging file is no longer swinging wildly, and the UI response feels way more snappy.

Question 8

My i5 14600KF keeps dropping frames during heavy combat in Gray Zone Warfare. Should I tweak virtual memory?

Accepted Answer

Every time a firefight gets intense, the game just hitches for a split second. It's enough to make me want to throw my PC out the window. The default voltage curve on the Intel Core i5 14600KF was dipping from 1.15V to 1.02V during high-frequency instruction bursts. I tried enabling 'Ultimate Performance' mode in Windows, but the CPU instantly hit 95℃ and started thermal throttling—that trial and error was a total nightmare. I went into the BIOS Advanced Voltage settings, changed the Load-Line Calibration (LLC) from Auto to Level 4, and nudged the VCCSA voltage to 1.22V. In Cinebench R23 stress tests, the Vcore fluctuation stayed within ±0.03V, and my frame times tightened from a messy 12-45 ms to a smooth 8-14 ms. I did get some annoying coil whine after the first voltage bump, but a small offset of -0.02V killed the noise. CPU temps are now 72-82℃, and the VRMs are at 55-62℃. Everything is stable after the final check.

Question 9

MSFS 2024 keeps hitching on my Maxsun MS-eSport B850M WIFI ICE. Do I need to tweak virtual memory?

Accepted Answer

Whenever I flew over dense urban areas, the ground buildings would just hang for a second, creating this visual disconnect that was honestly anxiety-inducing. The PCIe 4.0 link on the Maxsun MS-eSport B850M WIFI ICE was showing random latency spikes of 12-18ms while churning through massive texture arrays. I tried disabling every single background update service in Windows, but the stuttering didn't budge—it was a reminder that software tweaks are useless against a hardware-level bottleneck. I went into the BIOS and forced the M.2 interface from 'Auto' to 'Gen 4' and slapped on the latest chipset drivers. In CrystalDiskMark stress tests, the random read curve flattened out beautifully, and the scene loading felt way more complete. One weird side effect: forcing Gen 4 made my secondary SATA drive take longer to be recognized, which I had to fix by reassigning the board's port priority. VRM temps stayed around 48-55℃. After comparing the logs, the resource loading stopped dropping packets, and the input response finally felt tight.

Question 10

I'm getting stuttering in Once Human when loading massive player bases with my SN850X 1TB!

Accepted Answer

Every time I enter a complex base, the game just hangs for a second. It's an absolute nightmare that almost made me reinstall everything. The WD Black SN850X 1TB was hitting response peaks of 80 - 120 ms when dealing with tons of fragmented files. I tried enabling 'Ultimate Performance' mode in Windows, but while the CPU felt snappier, the disk I/O wait times didn't budge—a total waste of time. I eventually ran a full-disk TRIM command and verified the 4K partition alignment, correcting it from an unaligned state to standard. In CrystalDiskMark, random reads climbed from 62 MB/s to 95 MB/s, and the hitching during scene loads significantly eased up. I did have a moment where the system went unresponsive during the TRIM process, but a quick reboot fixed it. Temps are hovering between 45 - 55℃ with a balanced load. I've finalized the read/write optimization in the storage management panel.

GamePP Frequently Asked Questions

When running Dota 2, high memory usage causes lag, how to observe memory Kingston FURY Beast 16GB DDR5 6000 usage in real time using desktop monitoring in GamePP?

How to determine if the computer has performance bottlenecks through the real-time monitoring data of GamePP?

In Baldur's Gate 3, abnormal motherboard temperature needs troubleshooting, how to monitor motherboard ASUS ROG STRIX Z890-A GAMING WIFI S Snow Edition fluctuations in real time via performance statistics in GamePP?

How to use the Hardware Monitoring module in GamePP to monitor the GPU Colorful iGame GeForce RTX 5060 Ultra W OC temperature in real time while playing the game NARAKA: BLADEPOINT?

Overview: GamePP resolves real-time monitoring frame drop issues. With graphics card RTX 4070 in game Helldivers 2, want to see GPU temp but overlay eats too much performance, FPS drops straight away.