GamePP Frequently Asked Questions - Professional Hardware Monitoring Software FAQ Knowledge Base

This Onda B760ITX-B4 has been testing my patience. Every time I swing the Leviathan Axe, the action on screen is about 100ms behind my thumb. It feels like fighting underwater. A latency analyzer showed the NVMe drive and GPU were fighting for PCIe lanes, causing I/O wait times to jump between 15-40ms. I tried moving the drive to another slot, but the speed halved and the stuttering got even worse—I was honestly ready to toss the board in the trash. I eventually went into the BIOS, forced the PCIe link speed to Gen4 instead of Auto, and killed every single 'power saving' option. RTSS showed input lag drop from 45ms to a crisp 12-18ms. I did have some severe drive disconnects right after the change, but updating the chipset drivers fixed it. VRM temps are 62-70℃ and CPU power is 95-110W. Exported the logs to confirm the spikes are gone, and fans are steady at 1400-1600RPM. Last updated onFebruary 26, 2026 6:47 PM.

It's a joke—I bought a liquid cooler and I'm still getting stutters in firefights. The Cooler Master B240's default curve is way too lazy; it takes 6 seconds for fans to ramp from 600 to 1500 RPM, letting the core spike to 88℃ and throttle instantly. I tried the motherboard's 'Aggressive' mode, but that just turned my room into a wind tunnel without fixing the drops. Pure insanity. I ended up manually defining the trigger points: 55℃ for start and 70℃ for full blast, while killing all power-saving features. RivaTuner showed my frame times dropping from a messy 12-38ms range down to a tight 7-12ms. I had some annoying vibration noise at first because the fans kicked in too hard, but moving the fan mounts fixed it. CPU temps now hover at 65-71℃ with fans at 1200 RPM. I exported the logs and confirmed the fan speed is rock solid at 1400-1600 RPM. Last updated onMarch 14, 2026 7:47 PM.

This 4TB Fanxiang S790 is an absolute data hog in Overdrive mode. The moment my free space drops below 15%, the write amplification kicks in and it's just ridiculous. While playing Cyberpunk 2077, my frame times were dancing between 10-100ms—it felt like I was playing a slideshow. I tried uninstalling a bunch of random software, but the system temp files were still hogging 50GB; a complete waste of time. I finally used a pro tool to deep-clean the shader cache and moved my page file to a secondary drive to take the I/O pressure off the main disk. My latency analyzer showed response times plummeting from 40-120ms down to 12-25ms, and the drops finally stopped. I did have a heart attack when the system BSOD'd immediately after moving the virtual memory, but reconfiguring the BCD boot entries fixed it. Temps are around 48-55℃ and speeds are hovering at 5000MB/s. I exported the system logs to verify the latency is gone. It's a relief. Last updated onApril 3, 2026 1:15 PM.

This was insane—during full-screen ultimate attacks, my CPU was bouncing between 3.8GHz and 4.5GHz, making the game look like a slideshow. Even with the top-tier Noctua NH-D15 G2 chromax.black, the core temps were hovering around 82-88℃, triggering constant frequency shifts. I tried a blind overclock in the BIOS first, but it hit 98℃ and the whole system shut down, which gave me a real heart attack. I switched to an undervolt strategy, setting the offset to -0.06V and using a stepped fan curve. Using RTSS, I saw my frame times shrink from a messy 14-24ms down to a tight 9-12ms. I did hit a wall where -0.06V was unstable and caused a BSOD, so I settled at -0.05V for the perfect balance. Now temps stay between 67-73℃ and there's zero pressure on the cooler. Exported logs show frame times are now consistently between 5.1-6.4ms. Last updated onMarch 6, 2026 8:58 AM.

Saving in this game feels like a benchmark test for your SSD; every time it autosaves, the screen just freezes for half a second. It's maddening. Once the SLC cache on the GW3300 fills up around 50GB, the write speed plummets from 3000MB/s to about 800MB/s, which completely blocks the game's main thread. I tried disabling all background updates in Windows, but that was a total waste of time—the stutters remained. I eventually forced a write-combining strategy through the registry and used a cleanup tool to clear 100GB of redundant fragments. In IOPS stress tests, random write latency dropped from 110us to 75us, and those micro-stutters finally died. I actually bricked my boot sequence once after the registry tweak and had to use a recovery drive to get back in, which was a heart-attack moment. Temps are sitting at 48-55℃, so the heatsink is barely keeping up. Exported logs show fan speeds steady at 1400-1600RPM. Last updated onFebruary 25, 2026 11:12 AM.

Back to Top