Question 1

DeepCool AK500 White is hitting thermal saturation in Returnal and killing my clocks. Can I fix this with process priority?

Accepted Answer

Trying to cool a top-tier CPU with this 'Ice Cube' is like trying to put out a forest fire with a squirt gun—completely ridiculous. After two hours of gameplay, core temps crept up to 92-96℃, and my clock speed crashed from 4.8GHz to 3.2GHz, turning the game into a literal slideshow. I tried limiting the maximum processor state to 99% in Windows, but I lost 30 FPS instantly. I actually laughed at how bad that 'fix' was. Instead, I overhauled my case airflow, slapping a high-pressure 12cm fan directly onto the fins and setting the curve to hit 100% at 75℃. HWInfo confirmed temps dropped to 72-78℃, and the performance was finally unlocked. The noise increased by about 8dB, which was annoying until I lowered the RPMs below 60℃. Even at 90% CPU load, the clocks stay high now. I exported the telemetry and confirmed the fan speed is stable between 1400-1600RPM, though the AK500 is clearly outclassed here.

Question 2

Does the Onda B760ITX-B4 cause crashes in Granblue Fantasy: Relink due to voltage instability in raids?

Accepted Answer

The visual effects in this game are gorgeous, but my PC decided to perform a spontaneous reboot mid-fight, which was just great. The power delivery on the Onda B760ITX-B4 couldn't handle the transient CPU spikes, causing the core voltage to plummet from 1.18V to 1.04V and triggering a hard reset. I tried closing every background app in Windows, but that just disconnected my chat apps and did nothing for the crashes—complete waste of effort. I went into the BIOS, changed Load-Line Calibration from Auto to Level 3, and tweaked the VCCSA voltage to 1.20V. In Cinebench R23, the voltage ripple was capped at ±0.03V, and the random reboots stopped. Early on, I pushed the voltage too high and the CPU hit 98℃, so I had to aggressively rebuild my AIO fan curves to bring it down. Now it sits at 76-83℃ with VRMs at 58-63℃. Exported the voltage curve data to confirm stability.

Question 3

Gears 5 keeps crashing during heavy fights on my Fanxiang S790 4TB due to virtual memory overflow. Can priority tweaks help?

Accepted Answer

Running this game on a 4TB drive should be a breeze, but the cache scheduling was a total maze. Once the Fanxiang S790's dynamic SLC cache filled up, write speeds plummeted from 7000MB/s to under 800MB/s, creating a massive I/O bottleneck during asset decompression. I tried clearing temp files first, but gaining 2GB of space was like trying to put out a forest fire with a water pistol. I eventually moved the page file to a non-system partition and locked it at a fixed 16GB-32GB to stop Windows from constantly resizing it. Resource Monitor showed disk active time dropping from a choked 100% down to a healthy 40-60%. I did notice some stuttering when launching old legacy software after locking the page file, but switching the memory management mode to 'High Performance' cleared it up. Drive temps are sitting at 38-45℃. I exported the crash logs via Event Viewer to confirm the fix, and fan speeds are steady at 1400-1600RPM.

Question 4

My Vastarmor RX 9060 XT keeps crashing with VRAM checksum errors during ultimates in ZZZ; will voltage help?

Accepted Answer

The effects in this game are gorgeous, but my GPU decided to perform a hard reboot right in the middle of a fight, which was just fantastic. The memory controller on my Vastarmor Radeon RX 9060 XT 16GB OC was hitting a voltage drop at 1.35V during heavy particle effects, causing random bit-flips and triggering a kernel crash. I tried dropping the graphics to medium, but that just made the game look like a pixelated mess without stopping the crashes—a total waste of effort. I went into the advanced driver settings, bumped the VRAM voltage to 1.40V, and slightly adjusted the core clock to 2400MHz for extra stability. During a FurMark stress test, VRAM temps sat at 72-78℃, and the system ran for 3 hours without a single error. At first, the fans sounded like a jet engine because of the voltage bump, but I fixed that by creating a custom fan curve. Core temps stayed at 60-66℃. I exported the voltage fluctuation data using a performance analyzer.

Question 5

I'm seeing weird visual noise and blurriness after enabling supersampling. Can I fix this?

Accepted Answer

Running a 6400MHz kit on this older title felt like using a supercar to go to the grocery store—complete overkill. But strangely, under heavy load, I noticed slight color bleeding on distant mountain textures, which was super obvious at 4K. It turns out the high-frequency signal on the Asgard Snow DDR5 6400 was causing tiny phase shifts when handling specific shader data. I tried turning off all anti-aliasing, but the game turned into a jagged mess, which was honestly kind of hilarious. I went into the BIOS and clocked the memory down slightly to 6200MHz while bumping the voltage to 1.4V to stabilize the signal. In side-by-side screenshots, the edges became sharp again and the bleeding vanished. I lost about 3% bandwidth, but the game didn't care. Temps are steady at 50-56℃, and my fans are humming along at 1400-1600RPM.

Question 6

My PC keeps rebooting during big boss fights in Elden Ring. Can I fix my NH-D15 G2 heat issues?

Accepted Answer

The optimization in this game is a joke. I have a top-tier cooler and it still managed to trigger a full system shutdown. The Noctua NH-D15 G2 chromax.black is a beast, but during these insane power spikes, I saw temps jump to 92-96℃, which triggered the motherboard's OVP/OTP protection and rebooted the PC. I tried lowering the PL1/PL2 power limits in the BIOS, but that just cost me 15 FPS without stopping the crashes—total waste of time. I eventually ripped the cooler off and applied a 0.12mm high-conductivity liquid metal compound and set my case to positive pressure. Running AIDA64 FPU, temps plummeted from 95℃ to a manageable 78-82℃, and the random restarts finally stopped. I actually messed up the mounting pressure at first, causing a weird temp delta, but re-torquing the screws fixed it. VRM temps are now sitting at 60-65℃, and frame times are locked at 5.1-6.4ms. It's a lot of effort for a game, but it works.

Question 7

I'm getting unstable timings and frame drops in Dead Space Remake with Kingbank DDR5, will priority help?

Accepted Answer

Using 64GB of RAM for this game is like using a semi-truck to buy groceries—completely overkill. But for some reason, with Ultra textures on, my FPS was jumping wildly between 110 and 70, which totally killed the horror vibe. The default XMP profile on the Kingbank Black Blade DDR5 6000 was hitting random latency peaks of 12-18ms at 4K. I tried 'Low Latency Mode' in the drivers, but that just made the stutters more frequent while only adding 5 FPS—honestly laughable. I went into the BIOS and manually loosened the primary timings from 36-36-36-76 to 38-38-38-80 and bumped the voltage to 1.4V. AIDA64 showed latency dropping from 88ns to a stable 72-76ns, and the 1% lows improved significantly. The RAM temps shot up to 62℃ immediately after the voltage bump, so I had to rearrange my case fans to cool it down. RAM usage stays around 22-28GB, and fan speeds are locked at 1400-1600RPM.

Question 8

My Ryzen 7 7800X3D keeps crashing in Manor Lords when managing big towns. Will changing priority help?

Accepted Answer

The simulation load in this game is just insane. My CPU basically decided to go on strike, which was just great. Even with the 3D V-Cache, the Ryzen 7 7800X3D was seeing memory latency swing wildly between 75-110 ns when processing thousands of entities, which triggered the game's memory protection and crashed it. I tried lowering the population cap, but that just made the game boring without stopping the crashes—a complete waste of my time. I headed into the BIOS, locked the FCLK frequency at 2000 MHz, and tightened the main memory timings from 36-36-36-76 down to 32-38-38-72. After 4 hours of TM5 stress testing, there wasn't a single error, and latency stabilized at 64-68 ns. I actually hit some WHEA errors early on because I pushed the FCLK too high, but dropping it by 100 MHz fixed everything. CPU is at 65-75℃, and RAM is between 48-54℃. Exported the latency curves to confirm the fix.

Question 9

My ASRock A320M-HDV R4.0 keeps crashing due to VRM heat in Alan Wake 2. Can I fix process priority?

Accepted Answer

Trying to run a next-gen beast like Alan Wake 2 on an A320 budget board is basically like trying to tow a shipping container with an electric scooter—it's just absurd. Once I turned on Ray Tracing, the VRM power stages rocketed to 105-110℃, triggering the hardware protection and crashing the game to desktop without warning. I tried adding an extra fan to the top of the case, but it only dropped the temps by 3℃, which was honestly laughable. I had to go into the BIOS and hard-cap the CPU PPT power limit to 65W and enable low-voltage mode. With HWInfo monitoring, the VRM temps were finally pinned between 82-88℃, and the crashes stopped entirely. The trade-off was a roughly 5% dip in single-core performance and an extra 10 seconds on loading screens, but hey, at least the game is playable now. CPU cores stayed around 68-75℃. I exported all the crash logs from Windows Event Viewer to confirm the stability, with fans humming steadily at 1400-1600RPM.

Question 10

My Kioxia Exceria Plus G4 1TB is throwing I/O errors and crashing during intense combat, help!

Accepted Answer

The way this game hammers the SSD is just insane. My drive basically decided to go on strike mid-fight, which was just great. The Kioxia Exceria Plus G4 was hitting signal sync delays of 12 - 18 ms on the PCIe 5.0 interface during high-frequency small file R/W, triggering a kernel error and a hard crash. I tried underclocking my CPU in the BIOS, but that just cost me 10 FPS without stopping a single crash—complete waste of effort. I finally grabbed the latest official firmware update and manually locked the PCIe link speed to Gen 5 mode, disabling dynamic bandwidth scaling. In Iometer stress tests, I/O errors dropped from 5 per hour to zero. The system is finally stable. I noticed the idle power draw went up by about 1W after the update, but tweaking the power management options brought it back down. Temps are staying between 50 - 60℃. I've exported the I/O stability logs for verification.

GamePP Frequently Asked Questions

How to benchmark motherboard ASUS TUF GAMING B850M-PLUS WIFI overall system stability in Genshin Impact using GamePP?

How to benchmark CPU AMD Ryzen 7 7800X3D multi-threaded performance in GamePP during game Apex Legends?

How to use GamePP performance test SSD Samsung 990 PRO overall in the game Minecraft?

While playing game Valorant, want to evaluate GPU Colorful Battle Axe GeForce RTX 4060 Ti Deluxe Edition 8GB graphics capability, how to benchmark in GamePP?

How to benchmark Colorful iGame GeForce RTX 4060 Ultra W DUO 8GB performance in Apex Legends using GamePP?