Question 1

I'm getting scheduling delays and frame drops in CS2 on my ASUS TUF B850M-PLUS, can I fix this with timings?

Accepted Answer

During fast flicks, there's this tiny, subtle hitch in the motion that's incredibly obvious on a 240Hz monitor. AIDA64 showed that the ASUS B850M was struggling with high-frequency RAM, with controller latency swinging between 68 - 92ns, creating a bottleneck when the CPU processed network sync data. I tried disabling background services, but the frame variance stayed the same, making software tweaks feel completely empty. I went into the BIOS, flipped the memory mode from Gear 1 to Gear 2, and manually crushed the primary timings from 32-38-38-96 down to 30-36-36-92. Real-time monitoring showed latency stabilized at 62 - 66ns, and the fluidity during gunfights improved massively. I did have a couple of crashes when running heavy apps early on, but bumping the RAM voltage from 1.35V to 1.40V fixed it. RAM temps are 52 - 58℃, fans are at 1200 - 1400 RPM, and the GPU stays at 62 - 68℃.

Question 2

I'm getting scheduling delays and frame drops in CS2 on my ASUS TUF B850M-PLUS, can I fix this with timings?

Accepted Answer

During fast flicks, there's this tiny, subtle hitch in the motion that's incredibly obvious on a 240Hz monitor. AIDA64 showed that the ASUS B850M was struggling with high-frequency RAM, with controller latency swinging between 68 - 92ns, creating a bottleneck when the CPU processed network sync data. I tried disabling background services, but the frame variance stayed the same, making software tweaks feel completely empty. I went into the BIOS, flipped the memory mode from Gear 1 to Gear 2, and manually crushed the primary timings from 32-38-38-96 down to 30-36-36-92. Real-time monitoring showed latency stabilized at 62 - 66ns, and the fluidity during gunfights improved massively. I did have a couple of crashes when running heavy apps early on, but bumping the RAM voltage from 1.35V to 1.40V fixed it. RAM temps are 52 - 58℃, fans are at 1200 - 1400 RPM, and the GPU stays at 62 - 68℃.

Question 3

My Jonsbo CR-1400 is too slow to react during Call of Duty firefights, causing the CPU to throttle. Do I need a custom PWM curve?

Accepted Answer

In the middle of a heavy firefight, my CPU would spike from 68℃ to 94℃, and my clock speed would tank from 5.0GHz to 3.2GHz. It makes the game feel incredibly sluggish. The stock curve on the Jonsbo CR-1400 barely hits 1000 RPM before 80℃, which just isn't enough. I tried the 'Balanced' power plan in Windows, but that just made the clock speeds swing more wildly, triggering the thermal wall even more often. I went into the BIOS and forced the PWM curve to 1600 RPM at 70℃ and bumped the rear exhaust fan to 1200 RPM. AIDA64 stress tests showed peaks dropping from 96℃ to 78-84℃, and the throttling is gone. There was some annoying resonance at first, but I dropped the speeds below 50℃ to 600 RPM to quiet it down. CPU load is around 70%, and RAM temps are steady at 58-63℃.

Question 4

What do I do about the scheduling anomalies causing frame drops in Destiny 2 on a Soyo SY-Yanlong H410M?

Accepted Answer

During fast-paced strikes, I started noticing these subtle frame skips. It's not a total crash, but in a precision shooter, that kind of inconsistency is lethal. I checked the background logs and found that the Soyo SY-Yanlong H410M was mismanaging the core scheduling; some threads were stuck in low-frequency states, causing single-core performance to tank. I tried the Windows 'High Performance' power plan, but while the clocks went up, the scheduling latency stayed high—it proved the issue was rooted in the BIOS power-saving logic. I went into the BIOS, disabled Global C-States, and manually set the game process priority to 'High'. In RivaTuner, my minimums jumped from 40 FPS to a stable 65-72 FPS, and the input lag vanished. I did notice the CPU idle temps climbed by 6℃ after disabling power savings, but I fixed that by optimizing my case airflow. Now the CPU stays between 66-74℃ with power draw around 75W. The performance panel shows even thread distribution and frame times are a tight 5.1-6.4ms.

Question 5

I'm getting micro-stutters during high-speed combat in Scarlet Nexus with my Kingston 16GB DDR4 2666. How do I fix this lag?

Accepted Answer

During fast-paced dash attacks, the screen had this subtle 'twitching' sensation that was incredibly distracting, especially at 4K. AIDA64 revealed that while the Kingston 2666 RAM was stable, the low clock speed was causing the CPU to choke on particle effects, leading to scheduling delays of 18-25ms. I tried disabling every possible background service, but the frame variance stayed the same—software tweaks are a joke when you're hitting a hardware wall. I went into the BIOS and tightened the timings from 19-19-19-39 down to 16-18-18-36 and pushed the voltage to 1.35V. Real-time monitoring showed latency stabilizing between 82-88ns, and the combat fluidity improved drastically. I did have a couple of crashes when running heavy apps right after the change, so I had to loosen tRAS from 39 to 42 to get it rock solid. RAM temps are now 40-46℃ and fans are at 1200-1400 RPM. Frame times are now a consistent 5.1-6.4ms. It's a night and day difference.

Question 6

Is my i5 14600KF having E-core scheduling issues during ruins loads in Tomb Raider?

Accepted Answer

Whenever I was climbing, the screen would give these tiny, annoying twitches that totally broke the flow of the game. The E-cores on the i5 14600KF were lagging behind the P-cores by about 18ms - 26ms during background asset loads. I tried switching the Windows Power Plan to 'High Performance,' but that just spiked the power draw and hit the thermal wall faster, which made me very cautious. I eventually dove into the BIOS, changed the Load Line Calibration from 'Auto' to 'Manual L3 mode,' and nudged the VCCSA voltage to 1.22V. In Cinebench R23, my multi-core score jumped from 23500 to 24800, with temps sitting at 78℃ - 84℃. I actually had a random reboot the first time I touched the LLC, but backing the voltage offset from +0.02V to +0.01V stabilized everything. Now the physics frame time is tightened up to 12ms - 15ms. Real-time monitoring shows the scheduling is finally stable at 12ms - 15ms.

Question 7

Is optimizing thread priority the answer to the scheduling lag when entering cities in PUBG on a B760M?

Accepted Answer

While looting and moving fast, I kept hitting these micro-stutters that are absolutely lethal when you're trying to line up a sniper shot. Monitoring the backend revealed that the Colorful BATTLE-AX B760M was mismanaging cores, with some threads stuck in low-frequency states, causing single-core performance to crater. I tried lowering the global illumination in-game, but that only gained me 3 FPS and didn't stop the dips—it proved the issue was at the scheduling level, not the GPU. I went into system settings, forced the game process to High priority, and enabled the Memory Fast Boot option in the BIOS. RivaTuner showed the minimums climbing from 55 FPS to a stable 82-90 FPS. I had some brief system hangs after the first priority change, but updating the latest chipset drivers cleared that right up. CPU temps are 65-72℃ at 80W. Performance panel shows even thread distribution; the check is done.

Question 8

Far Cry 6 has weird scheduling lag in jungle areas on my Maxsun B850M, do I need to adjust memory timings?

Accepted Answer

Sprinting through the tropics felt 'jittery,' a subtle twitching that was painfully obvious at 4K. AIDA64 showed that the Maxsun B850M was struggling with 6000 MHz RAM, with controller latency swinging between 72ns and 95ns, creating a massive CPU bottleneck during physics calculations. I tried disabling every background service, but the stutters persisted—software tweaks are useless against bad hardware timings. I finally switched the memory mode from Gear 1 to Gear 2 in the BIOS and manually tightened the primary timings from 36-36-36-76 down to 32-34-34-72. Real-time monitoring showed latency stabilizing at 66-70ns, and the jungle scenes finally felt fluid. I had two full system crashes early on while tightening the timings, but bumping the DRAM voltage from 1.35V to 1.40V fixed it. RAM now sits at 50-56℃ with fans at 1200-1400 RPM. Comparative tests show memory temps staying between 52-58℃.

Question 9

I'm getting random read lag when moving through cities in Avowed. Why is it so choppy?

Accepted Answer

Sprinting through dense forest areas occasionally causes these tiny screen hitches that totally ruin the immersion. The WD SN850X 1TB struggles with fragmented scene data, with random read latency swinging between 12-20ms. I tried bumping my virtual memory to 32GB, but that just put more pressure on the drive and actually increased the stuttering—definitely a mistake. I ended up reformatting the drive with a 64KB allocation unit size and turned off the Windows prefetcher. My monitoring tools showed random read latency drop from 16ms to a steady 8-11ms, and the world transitions became seamless. I did have some old software throw compatibility errors after the format, but a driver reinstall cleared that up. Drive temps are stable at 42-48℃ with a load around 28%. Frame time analysis confirms the loading hitches are dead.

Question 10

Nioh drops frames in heavy combat with G.Skill Trident Z DDR4 3200, should I optimize channels?

Accepted Answer

During fast-paced parries and counters, I noticed these slight frame skips that are absolutely lethal in a game like Nioh. Monitoring the backend, the G.Skill Trident Z DDR4 3200 was only hitting about 25 GB/s, which became a massive bottleneck when the game had to calculate AI for multiple enemies. I tried lowering shadow quality, but that only gave me 2 FPS and didn't stop the skipping—it was clearly a throughput issue. I checked my motherboard and realized I was in single-channel mode; I moved the sticks to the correct slots for dual-channel and enabled 'Memory Fast Boot' in the BIOS. AIDA64 tests showed bandwidth jumping from 25 GB/s to 38-42 GB/s, and the combat feel improved instantly. I did have a boot failure after the first swap, but a quick reseat and cleaning of the gold pins fixed it. Memory temps are 40-46℃. CPU usage is now distributed much more evenly. Memory temp stayed at 40-46℃.

GamePP Frequently Asked Questions

"How do I set up storage monitoring for AMD Ryzen 7 7700X with MSI motherboards in GamePP?"

"What to do if GamePP doesn't detect RGB keyboards, and how to enable Valkyrie lighting on kills in Sekiro?"

How does GamePP display the frequency of the memory Kingston FURY Beast 32GB (2×16GB) DDR4 3600MHz?

How to read Memory Asgard VENGEANCE II DDR5 7200 C34 32GB(2×16GB) usage in GamePP for resource management?

How to display SSD Samsung 990 PRO PCIe 4.0 NVMe M.2 SSD (4TB) read/write speed data in GamePP during Apex Legends to check performance?