Driving through a busy RP city, my frames were jumping from 70 down to 40 constantly, and it was honestly driving me insane. The controller on the S910Max was having these wild frequency swings between 3.5-5.2GHz while handling heavy mod assets, causing data to bounce between channels. I first tried 'Ultimate Performance' mode in Windows, but the drive just hit 82℃ and the FPS still dipped—it was just adding heat for no reason, which was infuriating. I went into the BIOS, manually locked the PCIe power limits to High Performance, and disabled the L1.2 low-power state. In OCCT stress tests, the speed locked at 9000MB/s and frame times tightened to 18-22ms. I did have two random reboots early on, but adding a tiny +0.02V offset to the voltage stabilized everything. Temps are now 65-72℃ with fans screaming at 2200 RPM. I exported the BIOS profile to keep it safe, and the game finally feels responsive to my inputs. Last updated onMarch 23, 2026 12:47 PM.
Trying to run Black Myth: Wukong on this cooler is like trying to put out a forest fire with a spray bottle. At Ultra settings, the CPU hit 98℃ instantly, and my clocks plummeted from 5.2GHz to 3.8GHz, tanking my FPS from 60 to 35. I tried maxing out all the fans, but it sounded like a construction site and only dropped the temp by 3℃—a total waste of time. I finally went into the BIOS and set up a mild undervolt, dropping the core voltage from 1.35V to 1.28V, and swapped the rear exhaust for a higher static pressure fan. Max temps are now capped at 85-89℃, and I can actually hold 4.8GHz. I tried pushing it to 1.20V, but the game crashed during scene transitions, so 1.28V is the sweet spot. Average temps are now 75-82℃. Saved the voltage and fan profiles for a backup. Last updated onMarch 17, 2026 11:37 AM.
While swinging through New York, my RAM usage would rocket from 20GB to 80GB like a missile. It's a classic memory leak and it's honestly pathetic. Even with 96GB of Corsair Vengeance, a bug in the motherboard microcode meant the system wasn't reclaiming released resources. I tried lowering every single graphics setting, but the RAM still climbed regardless—it was a hopeless situation. I finally updated the motherboard to the latest microcode firmware, locked the virtual memory to 32GB, and enabled Windows Memory Compression. Resource Monitor now shows the peak usage staying stable between 35-42GB, and the crashes have stopped. I did lose my RGB lighting after the BIOS update, but a quick reinstall of the control software brought it back. Temps are around 48-54℃. I've backed up the microcode version and RAM parameters now, and the system is finally behaving. Last updated onMarch 21, 2026 2:18 PM.
This cooler is basically a paperweight when the CPU hits full load; temps shot up to 95℃ and my FPS plummeted from 70 to 30. Honestly, this thing is for office work, not open-world gaming. I tried enabling 'Power Saving' mode in Windows, but the game turned into a slideshow—an absolutely ridiculous 'optimization' attempt. I eventually went into the BIOS and capped the long-term power limit (PL1) at 65W, and cranked the rear exhaust fan to 100% to get the heat out. In RTSS, temps stayed between 78℃ - 84℃; still a bit toasty, but at least the aggressive throttling stopped. I tried pushing it down to 45W, but the game just started freezing, so 65W is the sweet spot. Clocks are now steady between 3.8GHz - 4.2GHz. I exported the BIOS profile so I don't have to deal with this nightmare again. It's a compromise, but it works. Last updated onMarch 28, 2026 10:22 AM.
This limited edition drive looks great, but when you're pushing 4TB of data, the SLC cache exhaustion is a total joke. Loading the complex scenes of Kamurocho caused write speeds to crash from 7000MB/s to 1800MB/s, making the loading screens stutter visibly. I tried a basic disk cleanup tool, but that just made the system indexing take longer—a total waste of time. I eventually used a partition tool to shrink the volume, manually leaving 200GB of unallocated space to expand the dynamic cache pool, and disabled write-cache flushing in Device Manager. In CrystalDiskMark, random writes jumped from 35MB/s to 62MB/s, and the loading speed recovered. I did notice some old saves were slow to load after the partition change, but a full TRIM pass cleared that right up. Temps are sitting at 45-58℃. I used a backup tool to export the optimized partition scheme so I don't have to do this again. It's a bit of a workaround, but it works. Last updated onApril 4, 2026 1:49 PM.
