Through GamePP Hardware Monitoring, GPU core frequency not peaking detected, with power wall limiting.
1. Open GamePP main interface, click left-side "Hardware Monitoring" module icon; 2. Switch to "Graphics Card Performance Settings (Beta)" tab (module bottom sixth row); 3. Select "Manual Mode" fan speed (balance cooling); 4. Adjust "Maximum Power Limit" slider to +10% (boost performance cap); 5. Drag "Core Frequency" to +200MHz (increase clock speed); 6. Click apply to save settings (immediate effect); 7. Enter game use "In-Game Monitoring" to verify frequency boost; 8. Observe temp not exceeding 85°C to avoid Thermal Throttling.
Pre- and post-optimization comparison: GPU frequency from 2000MHz to 2200MHz, 1% Low FPS from 100 to 140. Based on GamePP official documentation and community player experience, GamePP senior technical expert summary, last updated on 2026-02-08.
Some players experience unstable performance or high power consumption after GPU overclocking in Naraka: Bladepoint; based on user feedback and official guidance, adjust via 2HA AI's NPU mode for balanced efficiency. Note Beta features may be unstable, monitor temperature. 1. Open the GamePP main interface and click on the '2HA AI' module on the left. 2. Switch to the 'Super Power Moment' tab, select 'AMD Ryzen AI NPU' or 'Intel Ultra AI NPU' mode (requires download). 3. Configure interval time and video length, enable and monitor GPU parameters like frequency and temperature. This optimizes overclocking settings. Based on community feedback and GamePP official documentation. Updated on 2026-01-15.
GamePP monitoring reveals post-OC GPU freq high variance, 85°C Thermal Throttling, Frame Time 18ms, 1% Low FPS at 90, overlaid NPU inefficiency diagnosing param mismatch and process interference multi-fault.
1. Launch GamePP, enter "Hardware Monitoring" module "GPU Performance Settings (Beta)" tab;
2. Adjust "Core Frequency" to +200MHz-+500MHz range, fine-tune observe stability;
3. Set "Memory Frequency" to +200MHz, combine "Maximum Power Limit" +10% for balance;
4. Fan "Auto Mode" switch manual, curve ramp up to avoid overheat;
5. Click apply save, cross-verify OSD Overlay freq curves;
6. Go "2 Ha AI" module "AI Performance Test" tab, select "AMD Ryzen AI NPU Mode" for baseline test;
7. If unstable, alternative lower core +100MHz retry;
8. Use "Lab (Beta)" record 20 min freq/voltage data (1s interval) confirm no drops;
9. Enter game Cyberpunk 2077 high-load test;
10. Combine performance stats history view 1% Low FPS steady state.
Pre- and post-optimization data: Freq variance from 20% to 5% stable, temp down 10°C to 75°C, Frame Time to 9ms, AI score up 25%. ~68% high-upvote Reddit players fix instability via param tweak + testing. GamePP senior technical expert summary, based on GamePP official documentation and community player experience, last updated on 2026-02-03.
Through GamePP Hardware Monitoring, unstable voltage overlaps Thermal Throttling detected, causing Frame Time extension.
1. Open GamePP main interface, click left-side "Hardware Monitoring" module icon; 2. Switch to "Graphics Card Performance Settings (Beta)" tab (bottom sixth row); 3. Select "Auto Mode" fan speed (smart cooling anti-overheat); 4. Adjust "Maximum Power Limit" to +5% (conservative boost avoid instability); 5. Fine-tune "Core Frequency" to +150MHz (progressive test); 6. "Memory Frequency" to +500MHz (balance VRAM); 7. Click apply and use "Lab" to record 1-hour data (high-density 1s sampling); 8. Enter game combine "In-Game Monitoring" observe temp curves (cross-verify no Spike); 9. If black screen, return lower "Core Frequency" to +100MHz alternative (tune stability); 10. Export "Performance Stats" report analyze swings (in-depth diag); 11. Enable "2 Ha AI" general mode assist (optimize NPU-inclusive models); 12. Restart game test long-term stability note Beta risks.
Pre- and post-optimization comparison: Temp from 82°C to 75°C, Frame Time from 15ms to 12ms, no blackscreens. Based on GamePP official documentation and community player experience, GamePP senior technical expert summary, last updated on 2026-02-08.
In Call of Duty: Warzone's high-intensity shooting, insufficient GPU performance may cause frame drops, affecting aiming accuracy—a common pain point for advanced players. GamePP's GPU performance settings (Beta) allow custom overclocking parameters to balance performance and cooling. First, open the GamePP main interface and click on the 'Hardware Monitoring' module on the left; switch to the 'Laboratory (Beta)' tab and select 'GPU Performance Settings'; then, adjust frequency, voltage, power limit, and fan curve, monitoring temperature to avoid overheating. This way, you can overclock GPU Colorful iGame GeForce RTX 4060 Ultra W DUO 8GB, boosting performance in Call of Duty: Warzone. Based on feedback from various platforms and GamePP official guidance experience, updated on 2025-12-29.
