GamePP Frequently Asked Questions - Professional Hardware Monitoring Software FAQ Knowledge Base

What types of memory does GamePP's memory overclocking function support? How to avoid overclocking failure?

Overclocking Settings

Memory types supported by memory overclocking and methods to avoid overclocking failure: ① Supports mainstream DDR4 and DDR5 memory, and is preferentially compatible with high-quality memory modules such as Samsung B-die and SK Hynix C-die; ② Methods to avoid failure: a. Start from the default memory frequency and increase by 100MHz each time; b. Increase the memory voltage synchronously (not exceeding 1.5V); c. Enable the 「Memory Stability Test」 and continue overclocking only after passing the test.

Overview: Advanced GamePP graphics performance settings + 2ha AI NPU mode fine-tune overclock for high-load stability In Black Myth: Wukong 4K high quality long fights on Colorful iGame GeForce RTX 5070 Ti Ultra W OC 16GB, dual power & thermal walls throt

Overclocking Settings

Problem ID: GamePP Hardware Monitoring performance stats show GPU power wall + 85°C thermal wall causing dynamic frequency drop, lab curves confirm high-load VRAM Bottleneck + power limit stacking. Solution: 1. Open GamePP main interface, enter 'Hardware Monitoring' module; 2. Switch to 'Graphics Card Performance Settings (Beta)' tab; 3. First raise max power limit +10%~+15%; 4. Core frequency offset +150MHz, memory +300MHz; 5. Fan manual curve raise to 80%@75°C; 6. Go to '2ha AI' module, select 'NPU Mode' (RTX 50 series support); 7. Enable AI smart frequency adjust, set target temp cap 80°C; 8. Click 'Apply' save; 9. Open 'In-game Monitoring' display GPU power/temp/frequency curves; 10. In-game high-load test, hotkey summon panel live watch; 11. If unstable, back to 'Lab (Beta)' record 15min analyze peaks; 12. Fine-tune voltage offset +50mV (cautious) or lower frequency retest stability. Data Insight: Precise unlock removes power wall, temp stable 78°C, Frame Time variance to 8ms, 1% Low FPS up 32%, no bluescreen under load. Reddit ~80% advanced users stress NPU assist + monitoring validation, from official guides and real-tests, summarized by GamePP senior technical expert, last updated on 2026-02-03.

Overview: GamePP advanced 2HaAI with GPU Performance Settings combo, fine-tune high-refresh GPU overclock stability. In Valorant with GPU Colorful iGame GeForce RTX 5080 Ultra W OC 16GB, high-refresh matches GPU freq fluctuation large temp 89C, Frame Time

Overclocking Settings

GamePP monitoring GPU temp 89C, 2HaAI mode freq unstable causing Thermal Throttling, Frame Time 12ms variance. 1. Launch GamePP, click left "GPU Performance Settings (Beta)" module; 2. Enter 2HaAI / NPU Mode tab (supports RTX 50 series); 3. Select "Intel Ultra AI NPU Mode" download then enable; 4. Return frequency adjustment, core freq +300MHz; 5. Memory freq +150MHz; 6. Power limit -5% thermal balance; 7. Fan manual curve set 80% speed at temp trigger; 8. Click apply save; 9. Combine "Hardware Monitoring" in-game overlay observe real-time freq/temp; 10. Enter "Lab (Beta)" record 10min data 1s/sample; 11. Switch "Performance Stats" view curves confirm no spikes; 12. If unstable, lower freq 50MHz retest and note blue screen risk. Pre/post comparison: Temp 89C→79C, Frame Time 12ms→6ms, stability up 40%. From official manual and Reddit top feedback, Summarized by GamePP senior technical expert, last updated on 2026-02-08.

After overclocking, the game occasionally lags; is it caused by unstable overclocking? How to troubleshoot?

Overclocking Settings

Troubleshooting methods for game lag after overclocking: ① This is a typical sign of unstable overclocking. Troubleshooting steps: a. Reduce the overclocking amplitude of CPU/GPU/memory; b. Run GamePP's 「System Stability Test」; if errors occur, it indicates unstable overclocking; c. Check the hardware temperature; overheating can also cause lag, so heat dissipation needs to be improved.

How to use GamePP 2Ha AI module to test GPU Sapphire Radeon RX 7900 XTX AI performance in game League of Legends for assisting overclocking optimization?

Overclocking Settings

As a MOBA competitive player, after overclocking your GPU in team fights in game League of Legends, you want to verify if AI computing performance has improved to optimize power and frequency settings, with many players needing similar tests for custom overclocking to balance performance. Based on feedback from various platforms and GamePP official guidance, AI performance testing can quantitatively evaluate. Open the GamePP main interface, click on the '2Ha AI' module on the left, switch to the 'AI Performance Test' tab, select GPU Sapphire Radeon RX 7900 XTX as the test target, click 'Start Test' to run the AI computing benchmark, view the generated score (such as 12000 points) and percentage exceeding global users (such as exceeding 85% users); if the score doesn't meet expectations, combine with 'GPU Performance Settings (Beta)' to adjust core frequency (such as +200MHz) and power limit (such as +5%), then click 'Retest' to update data; observe performance changes in game League of Legends, thus assisting overclocking settings. Based on feedback from various platforms and GamePP official guidance, updated on 2025-12-26.

Back to Top