Overview: GamePP advanced overclocking settings solve power limit and temperature issues under heavy load In Black Myth: Wukong at 4K high refresh rate on NVIDIA GeForce RTX 5070 graphics card, after overclocking the GPU hits power limit hard at 89°C, 1%
Overclocking SettingsProblem ID: GamePP Lab (Beta) and OSD Overlay recording show severe GPU power limit and Thermal Throttling under heavy load. Solution: 1. Open main GamePP interface, click Hardware Monitoring module icon; 2. Enter Lab (Beta) tab and set 20-minute full GPU data recording; 3. Switch to Graphics Performance Settings (Beta) tab; 4. Set fan to manual and significantly raise high-load curve; 5. First lower max power limit to 98% for temperature control; 6. Gradually increase core frequency by 50MHz increments while monitoring; 7. Slightly raise memory frequency within safe range; 8. Go to in-game monitoring tab, enable GPU temperature, power, and frame time curves; 9. Set refresh time to 1.5 seconds and choose immersion mode; 10. Launch Black Myth: Wukong and observe data in real time; 11. Fine-tune voltage and frequency balance based on Lab curves; 12. Save final configuration and export performance report to verify stability. Data Insight: Before, GPU 89°C with severe power limit, 1% Low FPS ~58, high frame time variance; after, stable 76°C, 1% Low FPS up to 112, frame generation time reduced 4.2ms, greatly improved stability. GamePP Senior Technical Expert Summary, last updated February 17, 2026.
