Question 1

Frostpunk 2 is hitting Vcore instability with my RT620P during city expansion. Do I need to lock voltage?

Accepted Answer

While expanding my city in the freezing cold, my frames suddenly tanked from 100 down to 35. It actually made me want to see how far I could push my VRMs. I found that with the RT620P, the auto-voltage was bouncing between 1.1V and 1.3V during load shifts, causing the clock speed to crater. I tried 'Ultimate Performance' mode in Windows, but that just made the voltage swings even more erratic—totally naive of me. I headed into the BIOS advanced voltage settings and locked Vcore at 1.25V while setting PBO to Enhanced. The frequency monitor finally showed a stable 4.4-4.7GHz without the sawtooth pattern. At first, the CPU hit 93℃, which was scary, so I tweaked the fan curve and dialed the voltage back to 1.22V to find a balance. VRM temps are now sitting at 60-66℃ and the game is smooth as silk. Switched the motherboard profile to 'Extreme' and core temps are holding at 72-78℃.

Question 2

DLSS on my Gainward RTX 5070 Ti makes Silent Hill 2 look way too smooth and blurry, it's terrible!

Accepted Answer

Man, the difference is night and day—the building outlines in the fog became instantly clear after the tweak! Before this, using the Gainward RTX 5070 Ti Snow Step OC, the DLSS algorithm was over-smoothing high-frequency details, making character faces look like they had a soft-focus filter on them. I first tried switching DLSS to 'Performance' mode, which gave me about 12 more FPS but made the blur even worse—that was a complete non-starter. I then went into the NVIDIA Control Panel, bumped the image sharpening from the default 0.3 up to 0.68, and locked the in-game render scale to 100%. Looking at RivaTuner comparison shots, the edge sharpness is way better and the brushed metal textures are actually visible again. I did try maxing the sharpening to 1.0, but it created hideous white halos around objects, so I backed it off to 0.65 for the sweet spot. GPU temps are sitting at 58 - 64℃ with fans at 1500 - 1700 RPM. The internal analyzer confirms the sharpness is back, and the core is steady at 2520 MHz.

Question 3

I'm getting cache overflows and frame drops during scene transitions in Stellar Blade on my Zhitai TiPro9000. Should I lock I/O?

Accepted Answer

While sprinting through these gorgeous maps, my FPS would suddenly dive from 120 to 40, which honestly made me want to push the drive to its absolute limit just to see why. It turns out that once the Zhitai TiPro9000 2TB's dynamic SLC cache is tapped out, write speeds crash from 7000MB/s to below 1500MB/s, causing a momentary resource block. I first tried expanding the virtual memory, but in an open-world game, that just made the disk conflicts worse and the stuttering more frequent. I eventually went into Device Manager, pushed the NVMe queue depth from 1024 to 2048, and turned on the forced write cache flush. In the performance analyzer, I saw random read latency shrink from a volatile 15-30ms to a tight 6-11ms. I did hit a brief issue with drive recognition during idle after the first tweak, but switching to the High Performance power plan fixed it. The drive stays at 44-52℃, and by switching the storage mode to Extreme, my frame times are now a stable 7.2-9.1ms.

Question 4

I'm getting frame drops during complex scene loads in Indiana Jones. Do I need to change my PWM fan settings?

Accepted Answer

I was shocked that a simple fan curve tweak boosted my minimum FPS by 12! Before the fix, using the Jonsbo CR-1400 during heavy physics calculations caused my CPU to swing between 82-90°C, making the clock speeds jump erratically between 3.2 GHz and 4.1 GHz. I tried a power-saving mode first, but my frames dropped to 40, which was completely unplayable. I went into the BIOS, swapped the fan profile from 'Silent' to 'Performance', and pushed the 65°C trigger point to 1800 RPM. RTSS confirmed the 1% lows rose from 35 FPS to 52 FPS, and the frame time line smoothed out significantly. I did struggle with some annoying low-load humming after the switch, but dropping the sub-40°C speed to 800 RPM killed the noise. CPU temps now sit at 68-74°C. System info confirms the mode shift worked, and frame times are now locked at 5.1-6.4ms.

Question 5

I'm getting huge frame drops in Ghost of Yotei during scene loads with my Zhitai TiPro9000 1TB, help!

Accepted Answer

Riding through the snowy peaks, my frames would suddenly tank from 90 FPS to 30 FPS. It was a total performance dive. I found that once the Zhitai TiPro9000 1TB's dynamic SLC cache filled up, the write speed crashed from 7000MB/s to under 1000MB/s, causing a massive bottleneck in game asset streaming. I tried increasing the page file size, but that actually made the I/O conflicts worse in an open-world setting—just great. I went into Device Manager, bumped the NVMe controller queue depth from 1024 to 2048, and forced the write cache flush policy. Using a performance analyzer, I saw random read latency shrink from a jumpy 15-30ms to a stable 5-12ms. I did have some weird drive recognition delays at idle after the tweak, which I fixed by switching the power plan to 'High Performance'. Drive temps stay between 45-55℃. Switching the storage mode to 'Extreme' finally smoothed everything out.

Question 6

I'm getting frame drops in crowded cities in Black Desert with an i5-14600KF, should I tweak the Load-Line Calibration?

Accepted Answer

The difference is night and day—adjusting the voltage offset boosted my minimums by 15 FPS! Before this, my i5-14600KF was jumping all over the place between 3.5 - 5.3 GHz in high-load Remastered scenes, which absolutely murdered my 1% lows. I tried enabling Game Mode in Windows, but the drops kept happening; a simple toggle wasn't going to cut it for the level of smoothness I wanted. I went into the BIOS, set the Load-Line Calibration (LLC) to Level 3, and applied a +0.02V core voltage offset. RTSS showed my minimums climbing from 45 FPS to 68 FPS, and the frequency curve finally flattened out. I did have a couple of random reboots right after the first tweak, but dialing the VCCSA voltage to 1.25V stabilized everything. CPU temps are sitting between 68 - 75 ℃ with fans hitting 1800 - 2200 RPM. It's finally a consistent experience.

Question 7

Do I need to manually lock voltage if my G.Skill Trident Z RGB DDR4 3600 drops frames in Lost Ark raids?

Accepted Answer

Whenever I unleashed a full-screen skill in a raid, my FPS would dive from 120 down to 45. It was a total performance cliff. I discovered that the auto-voltage on the G.Skill Trident Z RGB DDR4 3600 was bouncing between 1.35V and 1.40V during heavy load spikes, causing the memory controller to choke. I tried the 'Ultimate Performance' power plan in Windows, but that actually made the voltage swings worse—totally naive move on my part. I went into the advanced voltage settings in the BIOS and hard-locked the RAM at 1.38V, while setting tRFC to 560 cycles. Using a latency monitor, I saw the memory latency tighten from a shaky 75-95ns to a consistent 68-72ns. The smoothness is night and day now. The sticks did hit 58℃ at first, but I adjusted my fan curves to compensate. VRM temps are around 55-61℃. I switched the mode from Balanced to Extreme via the software, and it's rock steady.

Question 8

I'm seeing major frame drops when switching planets in Star Wars Outlaws with a WD SN850X. Do I need to change PCIe lanes?

Accepted Answer

The difference is actually insane—my load times dropped from 18 seconds down to 7! I realized my WD SN850X was running in PCIe 3.0 compatibility mode, which capped my reads at 3400MB/s and caused those annoying hitches during complex scene transitions. I tried updating the storage drivers first, but that only shaved off a second, which was barely noticeable. I then flashed the latest firmware and went into the BIOS to force the PCIe slot to Gen4 instead of 'Auto'. CrystalDiskMark immediately showed sequential reads jumping to 7000-7300MB/s, and the game felt fluid for the first time. I did have a scare where the drive hit 72℃ right after the switch, but adding the OEM heatsink brought it back down to 45-52℃. There's a tiny bit of coil whine from the motherboard under full load, but it's not a dealbreaker. The system panel confirms the protocol is upgraded, and frame times are now a steady 5.1-6.4ms.

Question 9

I'm getting sudden frame drops in Overwatch 2 on my Biostar H310MHD3; should I manually lock the Vcore voltage?

Accepted Answer

Whenever I flicked my view during a chaotic team fight, my FPS would tank from 140 to 60 instantly. I checked the logs and found the Biostar H310MHD3's auto-voltage was bouncing between 1.0V and 1.2V during load spikes, causing the clock speed to plummet. I tried 'Ultimate Performance' mode in Windows, but that actually made the voltage swings more erratic. I ended up going into the BIOS Advanced Voltage settings and locking the Vcore at 1.18V with a +0.05V offset. Using a frequency monitor, the CPU finally stayed locked between 3.6-3.8GHz without those jagged drops. My temps spiked to 91℃ at first, which was scary, so I had to aggressively tune the fan curve and drop the voltage slightly to 1.15V. VRM temps are now 65-71℃, and the gameplay is finally smooth. I switched the performance profile to 'Extreme' via the board software.

Question 10

Helldivers 2 drops frames during heavy combat with my Crucial DDR4 3200. Is frequency fluctuation the cause?

Accepted Answer

The difference is insane; locking the frequency boosted my minimums by 20 FPS! Before this, my Crucial DDR4 3200 was jumping erratically between 2666MHz and 3200MHz during heavy firefights, which absolutely murdered my 1% lows. It felt like a constant, jarring hitch. I tried updating the BIOS, but the frequency swings didn't stop—totally useless for a competitive feel. I went into the BIOS, manually locked the frequency at 3200MHz, and bumped the voltage from 1.2V to 1.35V. In RTSS, the floor went from 35 FPS to 62 FPS, and the line finally flattened out. I did get a quick BSOD after the first lock, but loosening tRFC to 560 cycles fixed it. RAM temps stayed in the 42-48℃ range, and the motherboard VRMs were around 55-60℃. The system info panel confirms the mode is now locked, and temps are holding steady at 42-48℃.

GamePP Frequently Asked Questions

I'm getting terrible screen tearing in Control 2 on high settings with Kingbank Yin Jue 8GB DDR4 3600; should I tweak the sampling rate?

My 9800X3D has weird response spikes in crowded GTA V RP areas. Should I lock the core clock?

My PA140 can't keep up with the high-res patch in Judgment, my CPU is throttling badly!

I'm seeing terrible screen tearing in God of War Ragnarok (PC DLC) on my ASRock H310CM-ITX/ac. Should I change the PCIe link speed?

My Kioxia EXCERIA PLUS G4 has wild response swings in low-load areas of Valorant. Should I lock the PCIe link?