Does the Huntkey Blizzard T600 have voltage issues in Silksong?
During some of the more chaotic effect-heavy scenes, I felt these tiny hitches that are absolutely lethal when you're trying to nail a precision jump. Monitoring the rails showed the 12V output on the Huntkey Blizzard T600 was swinging between 11.4V - 11.9V during transient spikes, which made the CPU voltage unstable and caused clock jitter. I tried lowering the CPU power limit, but that just tanked my FPS from 144 to 110—completely useless. I ended up re-routing the cables, switching the CPU power from a single cable to dual independent lines, and setting the load line calibration to L2 mode in the BIOS. The 12V rail finally settled into a tight 11.9V - 12.1V range, and frame times dropped from 8-22ms to 6-11ms. I almost panicked when the system failed to boot twice because a cable was too tight, but a quick reseat fixed it. Now the PSU fan stays at 900-1200 RPM and CPU temps are 66°C - 74°C.
